| WHAT OUR CUSTOMERS ARE SAYING |
"Great job! No more busted up baseplates! Your product is a must have for any glock owner! GTUL gets a 10 out of 10 in my book. I wish you the greatest success,"
Brett C.
Lake Ariel, PA
|
| VIDEOS |
 |
|
General Precautions
- Always assume a gun is loaded, until you have verified yourself that it is empty.
- Never point a gun at something you do not intend to shoot.
- Always keep your finger off the trigger until you are prepared to shoot.
- Always make sure your backstop is adequate to stop and contain a bullet.
Unloading Procedures
- Point the pistol in a safe direction and keep your finger off of the trigger and out of the trigger guard.
- Press in the magazine catch.
- Remove the magazine.
- Keeping your finger off the trigger, and out of the trigger guard, lock the slide open by pulling the slide to the rear and pushing up on the slide stop.
- With the slide locked open, visually and physically check the chamber is empty.
- Unload the magazines, check that each magazine you are going to clean is empty, and remove all ammunition from the cleaning area.
- Please refer to your owner’s manual if you have any questions. If you are still uncertain, contact a qualified gunsmith.
Safety Note:
Always wear safety glasses when disassembling and cleaning your firearms to prevent eye injuries from springloaded parts and from any aerosols and solvents.
|
6275 University Drive, Suite 37
Huntsville, AL 35806
(757) 647-0805 |
