Gtul.png
Gtul.png
Cleaning your Glock magazines has never been easier!
You can now take apart your magazines without marring, gouging, or damaging the metal liner.

Quickly remove dirt, dust, powder residue and grime that may hinder reliability and cause a failure to feed.
Dissemble
and Clean your...

9MM/40S&W
10MM/45ACP
MAGAZINES
Glock 36

Glock 42/43
Glock 43X/48

Disassemble and Clean your Glock Magazines

GTUL has developed an integrated system to disassemble and clean all 9MM/40S&W, 10MM/45ACP, Glock 36, Glock 42/43 and Glock 43X/48 magazines. For use by Law Enforcement, competitive shooters and all those who demand positive ammunition feeding. This system addresses an often overlooked area of firearm maintenance for your Glock, cleaning the magazines. You can now take apart your magazines without marring, gouging, or damaging the metal liner. Quickly remove dirt, dust, powder residue and grime that may hinder reliability and cause a failure to feed. 

The Patented GTUL (U.S. Patent No. 7,712,243) minimizes wear and maintains the structural integrity of the locking tabs and notches, and limits the force that may be applied to the magazine. It can be used to remove all standard Glock floor plates for cleaning and installation of aftermarket Glock base plates. The precise fit, and compact design allows the magazine to be secured with one hand and apply force to disengage the locking tabs. This allows the other hand to be used to depress the retaining pin (if present), and slide the floor plate off. The Mag Brush has a punch built into the handle to depress the retaining pin, the nylon bristles are used to clean the magazine tube.

These products are proudly made in America. 
Thank you for looking at our website.

WHAT OUR CUSTOMERS ARE SAYING
Every Department Should At Least Have One

I was a Glock law enforcement armorer and firearms instructor for years. I still own several Glock's. One of the biggest training and miantenance problems has always been magazine dis-assembly and cleaning. That pinch required to free the magazine floor plate requires more effort than my tired old and arthritic fingers can exert these days. Your tool is perfect for me. I also think it would be perfect for any Glock armorer. Every department fielding Glock pistols should have at least one of your tool kits. A clean magazine is a functioning magazine. Pistols don't work without a properly functioning magazine, and your tool should encourage cleaner magazines by making it easy to do. Good job!

GTUL MagBrush Combo 10mm/45ACP

Received my package and it worked great on 10 round magazines.  The 10 round mags are notorious for being difficult to disassemble and I did not want to damage them.  This tool solved a lot of problems and I got my 10% springs installed.

Frank M
British Columbia, Canada
Should Be Mandatory Purchase For All Glock Owners

I recently purchased a Glock 26 and Pearce grip extenders, after three days of fighting to get the baseplates off I found your website.  I purchased the Mega Combo and Slide Tool.  I disassembled, cleaned and reassembled every magazine I own in less than ten minutes.  I was glad to see the Slide Tool, every time I remove the slide I think I will rip a finger nail off.  Great tools that work perfectly.

Tony F
Darlington, SC